Whole-House Repiping in Orange County

What is whole house repiping?

Whole house repiping replaces a home's old, failing water supply pipes with new PEX or copper lines connected to every fixture and appliance. Done-Rite Plumbing & Rooter repipes homes across Orange County.

Weak shower pressure and tap water that looks like rusty tea are signs that a home's pipes are failing from the inside out and need professional attention. Done-Rite Plumbing & Rooter is ready to assess your situation and provide lasting whole house repiping.

What are the warning signs of failing pipes?

The five main warning signs of failing pipes are rusty or discolored water, chronic low pressure, repeated leaks, sudden temperature swings, and banging or rattling noises in the walls.

A plumbing system rarely gives out overnight. The symptoms escalate, and ignoring them leads to much bigger, more expensive problems down the road. Our guide to the signs you need a repipe goes deeper on each one.

Why is my tap water brown or rusty?

Brown, yellow or greenish tap water, especially first thing in the morning, usually means internal pipe corrosion is releasing rust or mineral buildup into the water supply.

Beyond how it looks, discolored water signals serious pipe wear that can lead to leaks.

Why is the water pressure low throughout my house?

Hard water minerals and corrosion build up inside pipes over time and effectively shrink their diameter. That restriction chokes off water flow and causes low pressure throughout the house.

The shower is barely a drizzle, and the washing machine takes forever to fill.

What do repeated pinhole leaks mean?

One pinhole leak patched only for another to appear a few months later is a major red flag. Widespread corrosion means the whole pipe system is compromised, not just isolated spots.

Each leak wastes water, raises your bill and risks serious water damage.

Why does my shower turn scalding when a toilet flushes?

A shower that turns scalding or freezing when a toilet flushes signals a pressure imbalance. Corroded pipes can't deliver enough water volume, so one fixture "steals" from the already limited supply.

A sudden temperature swing is more than annoying. It can be a safety hazard.

Why do my pipes bang or rattle?

Banging, rattling, whistling or groaning from the walls or floors, often called "water hammer," can come from loose pipes vibrating or sudden pressure changes in restricted lines.

Pipe noises signal stress on the plumbing system.

Why do home water pipes fail?

The three most common reasons home water pipes fail are aging galvanized steel, pinhole corrosion in copper, and hard water scale. Understanding the cause is crucial to choosing the right fix.

What happens to old galvanized steel pipes?

Galvanized steel pipes are steel with a protective zinc coating inside. Over time that coating wears away, and the steel rusts from the inside out until it fails.

Galvanized steel water lines were common in older homes. The corrosion and scale buildup that follow can't be effectively repaired.

Why does copper pipe get pinhole leaks?

Over many years, water chemistry, stray electrical current and contact with concrete or soil can cause tiny pits to form in a copper pipe wall. The pits eventually break through as pinhole leaks.

Copper is durable, but it isn't invincible. Pinhole leaks often show up in several places at once, and patching individual leaks becomes a temporary and costly cycle. Repiping is the lasting fix.

How does scale damage a plumbing system?

Hard water carries dissolved calcium and magnesium that settle out as a hard, crusty buildup called scale on the inside of the pipes.

Scale progressively narrows the pipe, restricts water flow, speeds up corrosion and dramatically reduces the efficiency and lifespan of the plumbing system.

How does Done-Rite repipe a house?

Done-Rite repipes a house in five steps: inspect the pipes, choose PEX or copper, protect your home, run and connect the new lines, then pressure test and clean up.

1. Inspect: Our plumbers begin with a thorough inspection of the existing plumbing, often using a video camera to see the internal condition of the pipes.
2. Choose a material and plan: We explain the benefits of PEX and copper so you can choose the best material for your home and budget, then plan the most efficient and least invasive route for the new piping.
3. Protect your home:
4. Install: Our technicians open small sections of walls or ceilings where needed to reach the old pipes, then route the new lines and connect them to every fixture, appliance and the water heater. We often work in stages to keep some water available whenever possible.
5. Test and clean up: We pressure test the system to confirm there are no leaks and that water flows properly to every fixture, clean up the workspace, remove the debris, and walk you through the new system.

Done-Rite works on both slab and raised-foundation homes, and we pull the permit when one is required. All labor carries a minimum 1-year warranty.

How is a Done-Rite repipe priced and financed?

A whole house repipe from Done-Rite generally runs $18,000 to $30,000 depending on the number of bathrooms. Financing is available with terms up to 10 years.

Which related services help with pipe problems?

A video camera inspection gives a clear view of hidden issues, especially in drain lines, and drain cleaning keeps the whole system flowing when clogs or slow drains show up alongside pipe corrosion.

The health of your plumbing system is interconnected, so it's often wise to look at the drain side too when the supply pipes are failing.

When can Done-Rite assess my pipes?

Done-Rite Plumbing & Rooter is a family-owned business that offers 24/7 emergency service and a 1-hour response, without high-pressure sales tactics.

Failing pipes mean low pressure, discolored water and the constant worry of another leak. A whole house repipe is a significant investment in your home's comfort, safety and value. Contact Done-Rite Plumbing & Rooter today for a professional assessment and a clear path to reliable plumbing.