Faucet Installation in Orange County

What is professional faucet installation?

Professional faucet installation means removing the old kitchen or bathroom faucet, mounting a new one and connecting it to the water supply without leaks. Done-Rite Plumbing & Rooter installs faucets across Orange County.

A kitchen faucet that drips all day, a bathroom tap too weak for everyday tasks, or simply wanting a fresh look are all good reasons for a new faucet. Done-Rite Plumbing & Rooter is ready to provide faucet installation, with a 1-hour response and no trip charge.

How do I know it's time for a new faucet?

The four main signs it's time for a new faucet are a drip that won't stop, weak or uneven flow, rust or corrosion on the finish, and a handle or faucet body that wobbles.

Why does my faucet keep dripping?

A faucet keeps dripping when worn washers, O-rings or a failing cartridge inside can no longer make a tight seal, so water slips through after the handle is off.

A steady drip wastes a lot of water over a year and adds to your bill. A hidden leak under the sink can also damage the cabinet and lead to mold.

Why is only one faucet weak or spraying sideways?

When only one faucet is weak, the cause is usually inside that faucet. Mineral deposits or debris can clog the aerator, the small screen at the tip of the spout, or the cartridge.

Sometimes cleaning the aerator helps. If the cartridge or valve is clogged or worn, a new faucet is often the better fix.

What do rust stains on a faucet mean?

Rust stains, discoloration, pitting or cracks in a faucet's finish mean the protective coating has worn away and the metal underneath is breaking down.

Besides looking bad, a corroded faucet is weaker and more likely to start leaking.

Why is my faucet loose or wobbly?

A wobbly faucet usually means the mounting nuts under the sink have loosened over time, or the O-rings that help hold the faucet steady have worn out.

A loose faucet puts stress on the supply connections, which can lead to leaks under the sink.

What causes faucet problems?

The four most common causes of faucet problems are hard water mineral buildup, aging parts and everyday wear, corrosion from constant water exposure, and a faucet that was installed poorly in the first place.

How does hard water damage a faucet?

Hard water carries dissolved minerals like calcium and magnesium. Those minerals build up inside the aerator, the cartridge and the supply lines, much like scale inside a kettle.

Mineral buildup narrows the path for water and wears down the seals. Over time, scale leads to drips, low pressure and eventually a faucet that needs to be replaced.

Do faucets wear out with age?

Yes. A faucet is a small machine with moving parts, gaskets and seals. Every day those parts deal with pressure, temperature changes and friction.

As the parts wear, repairs work for shorter and shorter stretches. When a faucet reaches the end of its life, replacing it usually makes more sense than repairing it again and again.

Why do faucets corrode?

Faucets corrode because they are exposed to water all day, and hard water speeds up the wear. Over time, internal metal parts and the outside finish break down.

Corrosion weakens the faucet and leads to leaks and discoloration. Replacing a corroded faucet with a new, well-built model, such as one from Moen or Kohler, is the most dependable fix.

Can a bad installation cause faucet leaks?

Yes. Loose connections, stripped threads, poor sealing or mismatched parts from a past do-it-yourself job can cause ongoing leaks, a wobbly faucet and early failure.

A professional installation makes sure every connection is snug, the seals are seated correctly, and the faucet is mounted the way the manufacturer intends. Our comparison of DIY vs professional plumbing covers when a job is worth handing off.

How does Done-Rite install a new faucet?

Done-Rite installs a faucet in five steps: check the fit, shut off the water, remove the old faucet, mount and connect the new one, then test for leaks and clean up.

The steps are the same in Orange or anywhere else in Orange County.

1. Check the fit: We check your current setup and confirm the new faucet is the right fit for your sink and plumbing.
2. Shut off the water: We shut off the water to that fixture so we can work without any mess.
3. Remove and prep: We remove the old faucet and clean the surface where the new one will sit, which helps the new faucet seal tightly and sit steady. We also check the supply lines and shut-off valves for wear and let you know if any should be replaced.
4. Install: We install your new faucet, following the manufacturer's instructions for mounting and connecting the hot and cold supply lines, and we make sure the drain connections are secure.
5. Test and clean up: We turn the water back on and test for leaks, good pressure, and proper hot and cold flow. We clean up before we leave.

Done-Rite faucet installation labor comes with a minimum 1-year warranty.

What should I look for in a new faucet?

A new faucet should fit your sink's mounting holes, suit how you use the sink, and have a finish that hides water spots. Moen and Kohler are two brands Done-Rite works with.

• Count the mounting holes in your sink or counter so the new faucet fits, or plan for a cover plate.
• For kitchens, think about a pull-down or pull-out sprayer and a spout tall enough for large pots.
• Single-handle faucets are easy to use. Two-handle faucets give you separate hot and cold control.
• Pick a finish that hides water spots if you have hard water.
• Ask us about Moen and Kohler options.

Our kitchen plumbing guide explains how the faucet, sink and drain work together.

Which related services pair with a new faucet?

A faucet project is a good time to look at the rest of the sink, including an old garbage disposal or a drain that runs slowly.

If you're updating your kitchen faucet and your garbage disposal is old or struggling, it may make sense to replace it too. And if your sink drains slowly, professional drain cleaning can keep your whole sink system running smoothly.

When can Done-Rite install my new faucet?

Done-Rite Plumbing & Rooter is open 6:00am to 7:00pm every day. The company is independent and family-owned, with a 1-hour response and no trip charge.

A dripping or wobbly faucet only tends to get worse. When you're ready for a professional faucet installation, contact us to schedule your visit.